New redwood tends to contain a high amount of tannins. Tannins occur naturally in the redwood tree, and help to protect the living tree in the event of fire or other damage, by bleeding to the surface. Tannins can continue to bleed to the surface of the wood even after it has been milled. The wood cleaning process can bring tannins to the surface and cause the wood to turn very dark, even jet black.
Brighten the wood. If the wood has darkened during the cleaning process, use wood brightener. A good quality wood brightening product will neutralize tannins and restore the wood's natural beauty.
If the wood has not darkened during the cleaning process, there is no need to use wood brightener. Apply the wood stain. Stain can be applied using a brush, roller or sprayer. If you are applying with a brush or a roller, make sure to maintain a wet edge. If you allow the stain to dry and then go over it, you may notice lap lines.
Powered by NationalWeb. With the proper care and maintenance, a sturdy redwood fence can last for many years. Though paint is an option and it does protect the wood, it also hides the natural beauty of redwood. Using a water-repellent preservative on your redwood fence will enhance the natural color while protecting the wood grain. The following tips will provide with you the expertise on how to seal your Redwood fence so its natural beauty can be enjoyed.
Select a water-repellent preservative in either clear or tinted. Clear products do not affect the natural color of the wood but if you want to go a little darker, a tinted sealer is a good choice. Spread out a drop cloth under the work area. Stain, seal, and paint. Invest right from the start. Garden design can help. Remove mildew or mold — This step is for fences that weren't sealed right away. Allow your fence to dry! Apply your sealer — Follow your sealer manufacturer's instructions and apply your sealant.
Stick to the Fencing Regulations. Keep Plants Away from the Fence. Clean the Wooden Fence Regularly. Seal or Stain the Fence. Regularly Examine the Fence for Damaged Areas. Avoid Weighing Down the Fence. The appearance of these two woods can vary depending on the types. Redwood has a natural reddish-brown color, which darkens when higher levels of heartwoods are used.
It has a very tight grain and is usually free of knots and other defects. Cedar can be yellow, white or red, depending on the chosen species. So, to sum up: Pressure wash your deck rather than sanding it.
Clean and treat your deck with a preservative every two years. Remove any mildew by pressure washing thoroughly. Use a pressure washer with at least 1, psi. Use the fan setting on the nozzle and keep it moving to prevent a ripple effect. Use a polyurethane sealant to protect the fence from sun damage. After your fence dries off, apply the sealant to the fence with a bristle brush. Work the sealant into the fence in the direction of the grain, keeping the coating as even as possible.
Apply coats of sealant, letting it dry for 24 hours between coats. Dry rot occurs when a wooden fence loses the natural oils on its surface. Wet Rot. Use Proper Wood. Use Pressure-Treated Materials. Install Properly. Protect With Stain.
Keep The Fence Clean. Replace Rotted Wood. Redwood is a harder wood than cedar. Because it is a harder wood it will last longer and is more durable. Redwood has more natural occurring chemicals than cedar. This protects the wood so less maintenance is required over time. Should redwood fence be sealed? Category: hobbies and interests woodworking. Applying a clear finish to freshly cut wood will help retain the wood's appearance but will have no effect on its water resistance.
0コメント